- Switch Assembly Foot Operated Starter
- Ordnance# M13625/1-1
- Ucom Part# 4744
- NSN# 5930-00-350-3871
Type 4 Single Pole Single Throw
- Heavy Duty Normally Open
- Class A (Slow Make & Break)
- Grade 2 (Open)
- Rating at 24 VDC
- 300 AMP Resistive Load
- 150 AMP Inductive Load
- Pressure Required to Operate Switch 12 + - 2 lbs.
- Switch must withstand a minimum pressure of 300 lbs without damage
- Marking shall consis of the MS Part No. MS-27199-1 and Universal Identification In Accordance with MIL-STD-130
For more information not shown here, see Mil-S-13625.
_________________________________________
- Switch-Pull S.P.S.T. 24 V.D.C.
- Ordnance# Mil-S-13625/2-1 (Ref. MS27200-1)
- QPL# 8523 (Ref. -C-8339369)
- UCOM Part# 4813
- NSN# 5930-00-930-5016
- Type 5 (s.P.S.T. Pull Latch Disconnect, Normally Closed)
- Class A (Some Make and Break)
- Grade 2 (Open)
- Rating at 24 VDC
- 300 AMP Resistive Load
- 150 AMP Inductive Load
- Pressure required to operate switch 13 +- 2 lbs.
- Switch will withstand a min. pressure of 150 lbs without damage
For information not shown see Spec. Mil-S-13625.
_________________________________________
- Switch-Pull S.P.S.T.
- UCOM Part # 1331
- Peterbilt# 16-03677
- Kenworth# K301-57
- Paccar# BA2205
- Contact Rating: 300 AMP continuous with a 65.5 degree C Max. Temp rise measured at the outside of case
- Initial voltage drop at 30 VDC, 300 AMPS not to exceed 120 M.V.
- Type 5 (S.P.S.T Pull Latch Disconnect, Normally Closed)
- Grade 2 (Open)
- Force required to operate switch 57.8N+- 8.9N
- Finish: Zinc Plated
This switch is similar to MIL. SPEC Mil-S-13625 B. Type 5 Arrangement 2 Class A Grade 2 except for finish paint spec., contact material and rating.
